Hunting for a way to jazz up your wall artwork? like this generating your own Do it yourself acrylic frames for customized 3D artwork. This publish will walk you via specifically how I manufactured these in my house.
If you are looking for a personalized way to body your pics or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the great factor.
I landed on these frames mainly because I essential a small anything to include a little further pizzazz to my toilet wall. 
We made the decision to integrate my spouse&rsquos enjoy of golfing into the combine by printing photos he took of PGA golf classes he&rsquos performed in black and white.
I appreciate when art is a discussion piece, so this was the excellent addition to the rest room wall.
To make it definitely stand out, I designed these Do-it-yourself acrylic frames for each of the images.
Right here are the actions I took&hellip 
Desk OF CONTENTS
- one. Assemble your elements.
- two. Tape each facet of each corner.
- three. Mark wherever you want to drill your holes.
- four. Drill your holes.
- five. Use your glue dots to protected your photographs to the frame.
- 6. Mark the total on the wall where by you prepare to hold it.
- seven. Use your punch resource to mark the total on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- 10. Attach your frame to the standoffs.
- 11. Revel in the concluded solution!
Disclaimer: This submit does include things like affiliate backlinks for your ease. This is at NO further price to you but earns me a compact fee. To read through extra, check out out our disclosure plan.
1. Get YOUR Elements.
1st matters first, get all your supplies. All sources for every little thing I made use of are linked underneath. I also provided a record with one-way links of what we utilised to dangle the frames, way too. 
FOR Producing THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a single for the size of the opening of your standoffs and a single for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Instrument (I utilised a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Stage
- Punch
- Screwdriver
2. TAPE Every Aspect OF Every single CORNER.
Plexiglass/acrylic is quite delicate.
Mainly because of this, you have to be very cautious when you are drilling the holes.
Inserting a piece of painter&rsquos tape on either side wherever you prepare to drill your hole will assist continue to keep the acrylic sheet from breaking or cracking when you drill.
I also saved the protective deal with on just about every aspect of the piece, much too.
three. MARK Where by YOU WANT TO DRILL YOUR HOLES.
When you have positioned the painter&rsquos tape on all four sides (or even so numerous spots you plan to drill a gap), you can location a mark of where you want to drill your hole.
I drilled my holes one&Key in from each and every edge as you can see from the photo higher than.
4. DRILL YOUR HOLES.
In advance of in fact drilling, double and triple check that your marks are stage equally horizontally and vertically.
You&rsquoll want to have these amount for when you dangle them. 
The drill bit you choose should really be big more than enough to enable the standoff to in good shape in the gap.
I would do a examination operate on a piece of scrap substance to make certain it is major enough. 
Once you are specific that the marking are degree and the bit is massive enough, you want to start drilling.
Here is a excellent movie to follow if you would like a demonstration on how to drill as a result of acrylic.
You want to use about half ability when you are drilling.
Sluggish and steady. If you go to speedy, the acrylic will crack, so take your time.
As you drill you need to see spirals of the acrylic slowly but surely getting taken off. 
Repeat the drilling for each and every gap you need.
five. USE YOUR GLUE DOTS TO Secure YOUR Shots TO THE Body.
Once your holes are established, you can include your picture to the piece of acrylic/body.
The key here is to all over again, make sure your photograph is stage just before you absolutely secure it to the frame.
The glue dots are extremely sticky and don&rsquot let for a great deal of wiggle room, so it might be a great notion to line up a piece of lined paper at the rear of the body to assist you line the edges of your image.
No matter what trick performs for you to make absolutely sure the picture will get glued to the body degree will do. 
six. MARK THE Complete ON THE WALL In which YOU System TO Dangle IT.
As you commence to hang, mark your holes on the wall, but make confident your frame is amount.
If you measured appropriately in the move just before drilling, the holes on your body should really presently be amount.
If you are hanging a lot more than a person frame like I did, make guaranteed each individual body is level in your grid, also. 
7. USE YOUR PUNCH Software TO MARK THE Total ON THE WALL.
I love this software so much because it gets your gap begun and makes it possible for your drill to continue to be in put when you start drilling.
If you don&rsquot have a single, I remarkably suggest it!
8. DRILL YOUR HOLES IN THE WALL.
Be positive to use a little bit that matches the screws that came together with your standoffs.
This will most probably be a smaller bit than the one particular you utilized on the frames.
I also employed a stud finder to see if I needed drywall anchors, but because these frames are not that major, you could most likely do without the need of them.
9. SCREW THE STANDOFFS INTO THE WALL.
As soon as you buy your standoffs, you&rsquoll see how they work.
In get for the picture to &ldquostand off&rdquo the wall, you have to secure the standoff with the provided screw prior to attaching the image to the standoffs.
As you can see from the photo, making absolutely sure almost everything is amount and measured properly is super crucial. 
10. Connect YOUR Frame TO THE STANDOFFS.
Once you&rsquove attached the standoffs, it&rsquos time to attach the photographs!
Line up the standoffs with your drilled holes and protected the standoffs.
If all goes well, everything will line up correctly and be all set to go!
If you are like my father and I, you&rsquoll come across at the very least 1 that doesn&rsquot line up properly.
For this, we cheated a tiny little bit and secured the standoff to the frame and applied a glue dot to safe it to the wall, so it didn&rsquot transfer.
We only had to do this for two corners of two frames, but don&rsquot worry if you mess up 1&hellip We&rsquove been there! 
eleven. REVEL IN THE Finished Merchandise!
Now it&rsquos time to love your operate!
We did a grid of nine full pics which was a massive undertaking with all the measuring, but I&rsquom in enjoy with how it turned out.
Permit me know in the reviews what you feel of the completed product!
() ()